Micro Piston Vacuum Pump Manufacturer for OEM Equipment
Oil-free piston vacuum pumps: -55 to -70 kPa · 5–12 LPM · DC 6–24V
You are on the micro piston vacuum pump product page of Pinmotor (Shenzhen Pincheng Motor), a Chinese manufacturer of oil-free micro pumps, DC motors and solenoid valves since 2012.
Here you can compare our pump models, check real performance data with test conditions, download datasheets, and order 1–50 pc samples for bench evaluation.
For OEM projects, send us your target vacuum, flow, voltage and duty cycle — our engineers return a matched pump configuration within 24 hours, and samples ship in 7 days.
Micro Piston Vacuum Pump Models Available for Samples
Every model below is a standard product you can order as a sample of 1–50 pieces for bench testing. Pick the one closest to your working point, then we fine-tune it for your device.
WIDE VOLTAGE · 6–24V
Max vacuum: -70 kPa
● Flow: ≥5.5 LPM
● Voltage: DC 6/9/12/24V
● Port: Ø4.0 mm
Best for: beauty devices, personal care, adult products
LIGHTEST · 92 g
● Max vacuum: -70 kPa
● Flow: 5–7 LPM
● Voltage: DC 6/9/12/24V
● Port: Ø4.0 mm
Best for: portable medical suction, handheld instruments
HIGH FLOW · 8–12 LPM
● Max vacuum: -70 kPa
● Flow: 8-12LPM
● Voltage: DC 9/12/24V
● Port: Ø6.0 mm
Best for: vacuum packaging machines, booster systems
3000 h BRUSHLESS · PWM
● Motor: brushless, 3000 h
● Control: PWM speed adjustment
Best for: continuous-duty and adjustable-speed equipment
Full datasheet on request
Not sure which model fits?
Send us your target vacuum, chamber volume and voltage — our engineers return a matched configuration within 24 hours.
What Are the Key Specifications of a Micro Piston Vacuum Pump?
Performance by Voltage
|
Parameter |
Range | Notes |
|---|---|---|
|
Max vacuum |
-70 kPa / -525 mmHg | Per datasheet |
|
Vacuum flow (no load) |
5.0–12 LPM | Model dependent |
|
Rated voltage |
DC 6 / 9 / 12 / 24 V | Custom voltages on request |
|
Power |
6–12 W | Model dependent |
|
Noise |
≤75 dB(A) @ 30 cm | Free-standing |
|
Life test |
≥500 h brushed / 3000 h brushless | Continuous test |
|
Port size |
Ø4.0 / Ø6.0 mm | Barb type |
|
Weight |
92–300 g | Pump body |
How to Read These Numbers
Maximum vacuum and maximum flow are endpoint values — you cannot get both at the same time. As the vacuum level rises, the flow drops. So always size your pump at your working vacuum, not at the maximum. This is why we publish the test condition next to every number: it lets you compare our data fairly with any other supplier.
How Does a Micro Piston Vacuum Pump Work?
Intake → Compression → Discharge
A micro piston vacuum pump moves gas with a piston that travels back and forth inside a small cylinder:
1、Intake — the piston pulls back, the inlet valve opens, and gas is drawn in from your device.
2、Compression — the piston pushes forward, the inlet valve closes, and the gas is squeezed.
3、Discharge — the outlet valve opens and the gas is pushed out, leaving a vacuum behind.
Because there is no oil in the gas path (oil-free), the pumped gas stays clean — important for medical, food and lab devices.
Further reading: How Does a Mini Vacuum Pump Work?
Piston vs. Diaphragm Vacuum Pump: Which Fits Your Device?
When a Piston Pump Wins
Choose a piston pump when you need a deeper vacuum and higher flow in a small body, and your gas is dry and clean.
When a Diaphragm Pump Is the Better Fit
Choose a diaphragm pump when you pump moist or slightly corrosive gas, or need very low pulsation and quieter running.
| Point | Piston Pump | Diaphragm Pump |
|---|---|---|
| Vacuum depth | Deeper | Moderate |
| Flow | Higher | Lower |
| Size / weight | Compact | Compact |
| Moist / corrosive gas | Not ideal | Better |
| Pulsation / noise | Higher | Lower |
| Cost | Lower | Moderate |
If a diaphragm design suits you better, see our micro diaphragm vacuum pump range.
How Fast Can It Evacuate Your Chamber?
This is the question most engineers actually ask. Here is a simple way to estimate it.
t ≈ (V ÷ Q) × ln(P₁ ÷ P₂)
t = time · V = chamber volume (L) · Q = pump flow at that vacuum (L/min) · P₁ = start / P₂ = target pressure (absolute)
This is an estimate — it ignores hose losses and the natural drop in flow as vacuum rises.
Worked Examples: 50 / 100 / 500 cc
Assuming a 385-XZ at about 5 LPM near the working point:
| Chamber | Target | Approx. time |
|---|---|---|
| 50 cc | -50 kPa | a few seconds |
| 100 cc | -50 kPa | ~10 s |
| 500 cc | -50 kPa | tens of seconds |
Four Questions to Specify Your Pump
1. Vacuum level: What vacuum do you need at the device?
2. Volume & speed: What chamber volume, and how fast?
3. Voltage & duty: What voltage and duty cycle will it run?
4. Space & weight:How much room can you allow?
Send us these four answers and we will return
a matched configuration within 24 hours.
How Fast Can It Evacuate Your Chamber?
Vacuum Packaging Machines
Packaging needs fast evacuation and a reliable deep vacuum. The high-flow 555-XZ is the usual starting point.
Read: Micro Piston Vacuum Pump Packaging: How Much Vacuum Is Enough?
Medical Suction & Therapy Devices
These devices need a clean, oil-free air path and steady vacuum. The compact 385-XZ fits portable designs well.
Gas Sampling & Analytical Instruments
Sampling needs stable, repeatable flow. The 385-XZ / 395-XZ give consistent performance for field instruments.
Read: Micro Piston Pump for Gas Sampling: Flow Stability Guide
Industrial Automation & Pick-and-Place
Vacuum grippers need quick response and a strong hold. A high-flow piston pump gives fast, reliable suction.
Automotive & Beauty Equipment
From car comfort systems to beauty devices, these need low noise and a compact size.
Materials and Media Compatibility
Answer first: The standard build uses a PPS pump head, NBR piston seal, NBR valve plate and PA66 port — the right choice for dry, clean air, and enough for most packaging, automation and appliance projects. For humid, oily, chemical or patient-contact gas, we change the wetted materials instead of the pump. Tell us the gas and we confirm a build within 24 hours.
Materials you can specify
| Part | Materials available |
|---|---|
| Pump head / cylinder | PPS (standard) · PA66+GF · PBT · POM · PP · PVDF · PEEK · anodised aluminium · 304/316 stainless |
| Piston seal / cup | NBR (standard) · EPDM · FKM (Viton®) · silicone VMQ · HNBR · PTFE · neoprene |
| Valve plate / flapper | NBR (standard) · EPDM · FKM · silicone · PTFE-faced · stainless steel reed |
| Port / barb | PA (standard) · POM · nickel-plated brass · 304/316 stainless · PVDF |
| Tubing (on request) | Silicone · EPDM · FKM · PTFE |
Materials you can specify
| Your gas | Build we recommend |
|---|---|
| Dry, clean air | PPS head, NBR seals and valve (standard) |
| Humid air or condensation | EPDM seals, POM head |
| Oil mist or lubricated air | FKM seals |
| Acid, alkali or solvent vapour | FKM seals, PVDF or PTFE head |
| Patient-contact air path | Platinum-cured silicone, USP Class VI EPDM |
| Food-contact gas | FDA-grade silicone or EPDM |
Medical and food-contact paperwork
● ISO 10993 data on request — cytotoxicity, sensitisation, irritation, systemic toxicity
● USP Class VI compounds for patient-contact air paths
● FDA 21 CFR 177.2600 / 177.1550 and EU 10/2011 for food-contact parts
● RoHS and REACH declarations, per batch
ISO 10993 is assessed on the finished device, not on one component. We supply the material declarations and test reports that support your submission; we do not certify your device.
Three answers and we confirm
● What is the gas?
● What is the continuous temperature?
● What compliance does the device need?
Send these with your target vacuum and flow, and you get a build plus a quotation within 24 hours.
For a different architecture or a fully custom body, see our custom micro piston pump options.
Customization Options for OEM Projects
Answer first: Most OEM projects change two to four points on a standard model — not the whole pump. Some changes cost nothing; a few add engineering or tooling time.
What you can change
| What you change | Options | Lead time |
|---|---|---|
| Voltage & motor | DC 6 / 9 / 12 / 24 V · brushed or brushless · PWM | none |
| Ports | 4 / 6 / 8 mm barb · M5 or M6 thread · straight or right-angle | none |
| Connector & harness | JST · Molex · XT30 · bare wire · any cable length | none |
| Wetted materials | See the table above | none |
| Label & packaging | Laser marking · colour box · private label | none |
| Vacuum & flow working point | Eccentric, bore or stroke tuned to your duty point | 3–7 days |
| Noise & vibration | Rotor balancing · damped mounts | 3–10 days |
| Life & duty cycle | Brushless upgrade · bearing choice | 7–15 days |
| Mounting & dimensions | Bracket · hole pattern · new mould | 10–15 days (15–25 with tooling) |
What we need to quote
Six answers are enough: target vacuum and flow at your working point, voltage, duty cycle, gas and temperature, port and mounting, annual volume. The form at the bottom of this page asks for exactly these — an engineer replies within 24 hours.
For high-pressure air output rather than vacuum, see our high-pressure piston air pump range.
FAQs About Micro Piston Vacuum Pumps
What happens if the sample I test does not match my device?
Send us the measured difference — vacuum, flow and current at your duty point. We retune the eccentric, bore or seals and send a revised sample. Most working points are hit within two rounds.
Will the volume order perform the same as the sample I approved?
Yes. The sample is built from the same bill of materials and fixtures as production, and every production unit is tested against the approved sample's numbers. We attach the batch test record on request.
Can I order the pump as a kit with tubing, fittings and a driver?
Yes. We supply matched tubing, check valves, inlet filters and simple PWM driver boards as an accessory kit, tested together with the pump before shipping.
What payment and shipping terms do you accept for a first order?
For samples, PayPal or credit card with DHL or FedEx shipping. For volume orders, T/T with a deposit, on EXW, FOB Shenzhen or CIF terms. Importers can also ask about DDP delivery to an EU or US warehouse.
How do I mount the pump to keep noise and vibration down?
Use rubber grommets at the mounting holes, avoid a rigid tube-to-tube connection, and place the pump axis away from the main resonance direction of your housing. We include rubber feet with samples on request.
Are spare seals and valve plates available after the warranty?
Yes. Seal and valve kits are stocked per model and ship within 3 days. Give us the pump's serial number and we send the matching kit.
Do you work with importers and distributors
Yes. We support private-label marking and boxes, carton barcodes, flexible first-order quantities, and DDP delivery to EU and US warehouses for regular partners.
