English
  • ibhena
I-5V DC 2/3-Way Miniature Solenoid Valve Yamanzi | Umfanekiso Ophambili wePinMotor
  • I-5V DC 2/3-Way Miniature Solenoid Valve Yamanzi | I-PinMotor
  • I-5V DC 2/3-Way Miniature Solenoid Valve Yamanzi | I-PinMotor
  • I-5V DC 2/3-Way Miniature Solenoid Valve Yamanzi | I-PinMotor
  • I-5V DC 2/3-Way Miniature Solenoid Valve Yamanzi | I-PinMotor

I-5V DC 2/3-Way Miniature Solenoid Valve Yamanzi | I-PinMotor

Inkcazo emfutshane:

Ivalvu ye-solenoid encinci ye-5V DC eneendlela ezimbini esebenza kakuhle eyenzelwe ukulawula amanzi ngokuchanekileyo. Iimpawu ziquka ukusetyenziswa kwamandla aphantsi, uluhlu loxinzelelo lwe-0-350 mmHg, kunye nobomi bomjikelo we-500k+ cycle. Ilungele izixhobo zonyango kunye noomatshini bekofu. Umgangatho oqinisekisiweyo yiPincheng Motor. Ukuthunyelwa kwehlabathi ngokukhawuleza kuyafumaneka.

 

 

 

 


I-PDF

Iinkcukacha zeMveliso

Ividiyo

Imibuzo Ebuzwa Rhoqo NgeTekhnoloji

Iithegi zeMveliso

Inkonzo Elungiselelwe Wena

Ukubonelela abathengi ngeemveliso ezisemgangathweni kunye nenkonzo eyanelisayo

I-MOQ engama-500pcs

Ukuhanjiswa Okukhawulezayo

Isampulu eyenziwe ngokwezifiso

Umgangatho oBalaseleyo

Ixabiso lokuKhuphisana

Izixhobo zovavanyo zanamhlanje

Ivalvu yeSolenoid encinci ye-12v

Ixabiso elithengiswayo ngexabiso eliphantsi iMiniature 3 way solenoid air valve 12V ubukhulu incinci, ububanzi be-Air nozzle yi-φ3.mm. i-miniature solenoid valve 12V ubukhulu obuncinci, kulula ukuyihlanganisa nokuyiqhaqha. Umzimba we-valve wenziwe nge-aluminium echanekileyo kwaye inokumelana noxinzelelo oluqinileyo, i-Seal ilungile, ikhuselekile kwaye inokuthenjwa ukuyisebenzisa.

Ukumelana nokungqubana emngxunyeni kuncinci, uxinzelelo lomoya wokuqala luphantsi, kwaye ubomi benkonzo bude. Umsebenzi ocolekileyo, akukho jam xa usetyenziswa ngesantya esiphezulu.

Abavelisi abanamava

Uphando lobuchwephesha

Ubomi obude

Iinkcukacha ezifutshane zekhoyili eqinileyo kunye neendawo zokungena/zokuphuma zevalvu yamanzi encinci ye-5V DC.

Isicelo sezinto zesinyithi ze-DC Gear Motor eziyi-12v ze-100 rpm kumatshini wokuthengisa

(※ Cofa eli qhosha ukuze ubuze okungakumbi)

Iinkcukacha zobugcisa

Iinkcukacha Idatha yoBugcisa
I-Voltage elinganisiweyo I-DC 6V I-DC 12V I-DC 24V
Ikaliwe ngoku 300 ± 10% mA 240 ± 10% mA 240 ± 10% mA
Ukumelana neDC 20 ± 10% Ω 50 ± 10% Ω 100 ± 10% Ω
Amandla 1.8 W 2.88 W 5.76 W
I-Air Tap OD Ø 6.5 mm
Uxinzelelo oluphezulu 100 KPa (14.5 Psi)
Phakathi Amanzi
Isantya sokukhupha umoya 1.0 L/Mn
Uvavanyo lobomi Amaxesha angama-200,000 (KWimizuzwana emi-5, VULIWE kwimizuzwana emi-5)
Ukuvuza < 10 mmHg/min (ngaphantsi kwe-300 mmHg kwitanki ye-100cc)
Ubushushu bokusebenza 0 ~ 50°C, 30% ukuya kwi-85% RH
Uhlobo Ihlala Ivaliwe
Ubunzima Malunga ne-100g

Amanqaku okuHlanganisa ubuNjineli

1. Iimeko eziqhelekileyo zokusombulula iingxaki

Khupha Unobangela onokwenzeka Isenzo Esicetyiswayo
Ivalvu ayivuleki

Umbane onganeleyo okanye iingcingo ezikhululekileyo.

Qinisekisa ukuba umbane we-DC uhambelana ne-voltage elinganisiweyo (6V, 12V, okanye 24V). Jonga isixhumi se-XH2.54 ukuze ubone ukuba sinxibelelana njani ngokukhuselekileyo.
Ukuvuza kwindawo engekhoyo

Inkunkuma kwisihlalo sevalvu okanye ukuguguleka kwesitywino.

Hlamba isixhobo ngamanzi acocekileyo. Qinisekisa ukuba isixhobo asinazo izinto ezinokuthintela isitywina esiValekileyo (NC).
Ingxolo/Ukungcangcazela Okugqithisileyo

Ukuhamba ngebhayisekile ngokukhawuleza okanye umoya ubambeke emgceni.

Jonga umjikelo womsebenzi; kuphephe ukudlula isantya esicetyiswayo. Qinisekisa ukuba isantya sokukhupha umoya asidluli kwi-1.0L/Min.
Izinga lokuhamba elinciphileyo

Ukuvaleka kwimpompo ye-OD eyi-6.5mm.

Hlola i-Air Tap ukuze ubone ukuba akukho zingxaki kwityhubhu okanye i-calcification yangaphakathi.

2. Ulondolozo Lokuthintela kunye Neendlela Ezilungileyo Zokusebenza

  •  Ukuhluza iMedia: Ekubeni le valve yenzelweAmanzikunye ne-liquid media, sebenzisa isihluzi esingaphezulu ukuze uthintele ukungcola ukuba kungonakalisi i-diaphragm yangaphakathi.

  •  Ukubambelela kwiMijikelo yoMsebenzi: Ukufikelela kwiUbomi bomjikelo we-200,000, landela ngokungqongqo umjikelo womsebenzi ovavanyiweyo weImizuzwana emi-5 IVULIWE kwaye imizuzwana emi-5 IVALIWEAmandla aqhubekayo ngaphaya kwemida elinganisiweyo anokubangela ukugqithisa kakhulu kwekhoyili.

  •  Ukubeka iliso kwiNdalo: Qinisekisa ukuba indawo yokufaka ihlala ngaphakathi0°C ukuya kuma-50°Ckwaye30% ukuya kwi-85% ye-RHukuthintela ukonakala kwe-coil insulation okanye ukuqina kwe-seal.

  • Uhlolo lokuvuza: Vavanya rhoqo ukuba akukho monakalo. Iyunithi ye-PYF2-XG esempilweni kufuneka igcine izinga lokuvuza<10 mmHg/ngomzuzuphantsi kweemeko zovavanyo eziqhelekileyo.

3. Iingcebiso zoBunjineli boFakelo

  •  Ukuqhelaniswa: Ngelixa ivalvu incinci (Ubude obuyi-37mm), ukuyixhoma nge-coil ijonge phezulu kuyacetyiswa ngokubanzi ukuthintela ukwakheka kwe-sediment kwi-valve cavity.

  •  Ukhuseleko lweNtambo yeNkokeli: KhuselaIingcingo ze-lead ezingama-270mmukuthintela uxinzelelo kwiindawo zokufaka i-solder, ingakumbi xa kusenziwa i-massage eshukuma kakhulu okanye xa kusetyenziswa izixhobo zobuhle.

  •  Ukhuseleko lweSiqhagamsheliXa kuhlanganiswaIsiphelo esimhlophe se-XH2.54, qinisekisa ukuba ithebhu yokutshixa ibotshelelwe ngokupheleleyo ukuthintela ukulahleka kwamandla ombane okungapheliyo.

Umzobo woBunjineli bokucacisa

Iinkcukacha zobukhulu bePYF2-XG series: Ubude bomzimba 37±0.5mm, I-Air tap OD 6.5mm, Ubunzima malunga ne-100g.

Imifanekiso yepompo yegiya encinci--100% yokudubula okubonakalayo, Isiqinisekiso soMgangatho

I-Miniature yenzelwe ukuthengiswa kwefektri yamanzi yeValve ngobuninzi

Izicelo zeMveliso

Icandelo leShishini Iinkcukacha zeSicelo Iithegi
1. Ezonyango kunye noNyango Ilungeleizixhobo zonyango eziphathwayokunye nezixhobo zokuxilonga. Isakhelo esincinci esingama-37mm kunye nokusetyenziswa kwamandla okuphantsi (1.8W kwi-6V) zilungele iimonitha ezisebenza ngebhetri kunye neenkqubo zokunkcenkceshela ezizenzekelayo.Ubomi bomjikelo we-200,000iqinisekisa ukuthembeka kwiindawo zonyango. Ulawulo lolwelo olukumgangatho wezonyango, izixhobo zokuxilonga eziphathwayo, ivalvu enamandla aphantsi.
2. Izixhobo zeKhaya ezikrelekrele Yenzelwe i-iziphakeli zamanzikunye neenkqubo zokwenza ikofu ngokuzenzekelayo.Ihlala Ivaliwe (NC)Ivalvu inika indlela engenamthungo enesantya sokukhupha umoya esiyi-1.0L/Min.Ø Itephu yomoya eyi-6.5mmihambelana nemibhobho eqhelekileyo, ngelixa izinga lokuvuza elingaphantsi kwe-10 mmHg/min lithintela ukuvuza. Izixhobo zezixhobo ezikrelekrele, i-solenoid yokuhambisa amanzi, i-fluid routing yomatshini wekofu.
3. Ubuhle kunye nokuphila kakuhle Into ebalulekileyoizixhobo zobuhlekunye netekhnoloji yokuphulula ngomoya.Uyilo lwe-100givumela ukuhlanganiswa okulula kwizixhobo eziphathwayo. Ibandakanya iUcingo lwe-lead oluyi-270mmkunye nesikhuseloIsiphelo sendlela se-XH2.54ukwenza lula inkqubo yokuhlanganisa i-OEM. Izixhobo zobuhle, ivalvu yokuphulula umoya, ubunjineli bempilo-ntle.
Ukusetyenziswa kweseti yeti kusetyenziswa ipompo yamanzi ye-micro DC yodidi lokutya ukuze kukhutshwe amanzi ngokuzenzekelayo.

Itafile yeti

Isixhobo sokupakisha esincinci se-vacuum sisebenzisa ipompo encinci ye-DC yokukhupha umoya.

Umatshini wokupakisha we-vacuum

Ukufakwa kwesixhobo sokuhambisa amanzi ebhotileni kufuna ipompo yamanzi yombane encinci nekhuselekileyo nekumgangatho wokutya.

Umsasazi wamanzi

Isitshisi sokucoca izandla esenziwe ngefoam esizenzekelayo esisebenza ngepompo yombane omncinci.

Isicoci sezandla esinegwebu

Isixhobo sokukhupha iwayini sombane sisebenzisa ipompo encinci yeDC yokujikeleza kolwelo.

Isixhobo sokucoca umbane

Isixhobo sokuhlamba izitya sisebenzisa ipompo yamanzi ye-DC ethembekileyo yokujikeleza amanzi.

isihlambi zitya

Umgangatho woMveliso kunye nokuThotyelwa kweMithetho

At I-PinMotor, sibeka phambili ukuthembeka kunye nemigangatho yokhuseleko yamazwe ngamazwe ukuxhasa amaqabane ethu e-OEM kwihlabathi liphela.Uthotho lwe-PYF2-XGyenziwe phantsi kwemigaqo engqongqo yolawulo lomgangatho ukuqinisekisa ukuhlanganiswa okungenamthungo kwiimarike ezilawulwayo.

Ibheji yeSatifikethi esisemthethweni se-ISO 9001:2015 yokwenziwa kwePinmotor ekumgangatho ophezulu.

Isiqinisekiso se-ISO 9001:2015

Iziko lethu lemveliso eShenzhen lisebenza phantsi kweenkqubo zolawulo eziqinisekisiweyo yi-ISO, liqinisekisa ukuhambelana kweqela ngalinye kunye nemigangatho ephezulu yokuvelisa.

Inkqubo yoLawulo loMgangatho weeMoto zePinmotor (iQinisekiswe yi-IATF 16949:2016)

I-IATF 16949 Iyahambelana

Sisebenzisa indlela yokuziphatha yemoto ukuqinisekisa amazinga aphantsi kakhulu eziphene kunye nokuthembeka kwexesha elide kwizicelo ze-elektroniki zabathengi.

fikelela

I-RoHS kunye ne-REACH zihambelana ngokupheleleyo

Zonke izinto ezisetyenziswa kwivalvu yePYF2-XG, kuquka ikhoyili kunye nendlu, ziyahlangabezana nemigangatho yokhuseleko lokusingqongileyo yokuthintela izinto eziyingozi.

  • Uhlolo oluzenzekelayo lwe-100%: Iyunithi nganye ivavanywa ngokungqongqo kwifektri ukuze ibone ukuba akukho kuvuza (umda ongaphantsi kwe-10 mmHg/min) kunye nokumelana ne-coil ngaphambi kokuba ithunyelwe ukuqinisekisa ukuba akukho ziphene zikhoyo.

  •  Ukulungela Unyango Nokutya Okusemgangathweni: Le valve yenziwe ngezinto ezicocekileyo kakhulu, ifanelekile ukudityaniswa nezixhobo zonyango kunye neenkqubo zokuhambisa amanzi ezifuna imigangatho ephezulu yococeko.

Sinikezela ngezinto ezingaphezulu nje kwemveliso, sivelisa izisombululo ezilungiselelwe iimfuno zakho zesicelo.

Thelekisa, khetha, thenga ipompo yakho

Qhagamshelana nathi ngoku!

Usenokuzifuna ezi zinto emva kwe-odolo yakho

i-motor yegiya ye-tt ethengiswa ngobuninzi

Iimoto zeGear DC 24v

I-Mini Geared Motor 35NM TORQUE

Ukufundwa Okucetyiswayo

Indlela yokusebenzisa iMicro Gear Motor

  • Ngaphambili:
  • Okulandelayo:

    • Ingakanani i-5V solenoid valve esetyenziswa ngamandla?

    Uhlobo lwe-5V DC ludla ngokusebenza ngombane ophantsi, malunga ne-100mA ukuya kwi-200mA kuxhomekeke kwimodeli ethile. Ilungele izixhobo zonyango ezisebenza ngebhetri kunye neenkqubo zamanzi eziphathwayo.

    Ngaba le valve ingasetyenziselwa ukusebenza iiyure ezingama-24 ngokuqhubekayo?

    Sicebisa umjikelo womsebenzi we-50% ukuze ubomi bube ngcono. Ukuze usebenze ngokuqhubekayo, nceda uqinisekise ukuba ubushushu bucocwa ngokufanelekileyo okanye uqhagamshelane neenjineli zethu ukuze ufumane uhlobo lwekhoyili oluneqondo eliphezulu lobushushu.

    Ingakanani ixesha lokuphila levalvu encinci yePinmotor eneendlela ezintathu?

    Iivalvu zethu ze-solenoid ze-5V zivavanywa kwiibhayisekile ezingaphezu kwama-500,000 phantsi kweemeko zelebhu eziqhelekileyo (amanzi, ama-25°C).

     

     

     

     

    Bhala umyalezo wakho apha uze uwuthumele kuthi

    EzinxulumeneyoIMVELISO

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale