Li-valve tse nyane tsa solenoid ke likarolo tsa bohlokoa haholo lits'ebetsong ho tloha lisebelisoa tsa bongaka ho isa ho othomathike ea indasteri, moo taolo e nepahetseng ea mokelikeli le moralo o monyane li leng bohlokoa. Sebopeho sa ho koala li-valve tsena se bapala karolo ea bohlokoa ho thibeleng ho lutla, ho netefatsa nako e telele, le ho boloka ts'ebetso tlas'a likhatello le mocheso o fapaneng. Sengoloa sena se hlahloba meralo e tsoetseng pele ea sebopeho sa ho koala bakeng sali-valve tse nyane tsa solenoid, e totobatsang boqapi ba thepa, ntlafatso ea jeometri, le lits'ebetso tsa lefats'e la nnete.

---

1. Liphephetso tsa Bohlokoa ho Tiisoeng ha Valefo ea Mini Solenoid

Ho fokotsa li-valve tsa solenoid ho hlahisa liphephetso tse ikhethang bakeng sa ho koala:

• Sebaka se Lekanyelitsoeng: Mamello e tiileng e hloka ho lokisoa hantle ha likarolo tsa ho tiisa.

• Litlhoko tse Phahameng tsa Potoloho: Li-valve tsa bongaka kapa tsa indasteri li ka 'na tsa sebetsa lipotoloho tse limilione ntle le ho hloleha.

• Ho lumellana ha lik'hemik'hale: Litiiso li lokela ho hanela ho senyeha ke maro a mabifi (mohlala, li-solvents, mafura).

• Maemo a Feteletseng a Thempereichara: Tshebetso e lokela ho dula e tsitsitse ho tloha ho -40°C ho isa ho +150°C.

---

2. Lintlafatso tsa Lintho tse Ntlafalitsoeng bakeng sa ho Tiisoa ho Ntlafalitsoeng

A. Litiiso tsa Elastomer

• FKM (Fluorocarbon): E hanyetsa lik'hemik'hale hantle haholo bakeng sa mafura le oli; e sebetsa ho fihlela ho +200°C.

• EPDM (Ethylene Propylene Diene Monomer): E loketse ho sebelisoa ka metsi le mouoane; e hanela ozone le ho chesoa ke moea.

• Silicone: E tenyetseha mochesong o tlase (-60°C) empa e na le khanyetso e fokolang lik'hemik'haleng.

B. Litharollo tse seng tsa Elastomeric

• PTFE (Polytetrafluoroethylene): E batla e se na lik'hemik'hale, e na le khohlano e tlase bakeng sa litiiso tse fetohang.

• PEEK (Polyether Ether Ketone): Matla a phahameng le botsitso ba mocheso bakeng sa litsamaiso tse nang le khatello e phahameng.

• Litiiso tsa Tšepe ho ea ho Tšepe: Tšepe e sa ruseng kapa li-interface tsa titanium bakeng sa lits'ebetso tsa vacuum/khatello e phahameng haholo.

Thuto ea Nyeoe: Pompo ea ho kenya ea bongaka e sebelisang litiiso tse koahetsoeng ka PTFE ha ea ka ea lutla letho ka lipotoloho tse 500,000.

---

3. Ntlafatso ea Jiometri ea Meaho ea ho Tiea

A. Meralo ea Litiiso tse Matla

• Li-groove tsa O-Ring: Merokho e entsoeng ka mokhoa o nepahetseng e netefatsa ho hatelloa ho ts'oanang (karolelano ea 20–30%).

• Litiiso tsa Molomo: Liprofaele tse nang le likhutlo li fokotsa khohlano ha li ntse li boloka ho tiisa tlas'a khatello e fetohang.

• Litiiso tse Matlafalitsoeng ke Selemo: Kenya liliba tsa helical ho boloka matla a ho kopana mochesong o feteletseng.

B. Litharollo tsa Tiiso e sa Fetoheng

• Li-gasket tse bataletseng: Maqephe a PTFE kapa a graphite a khaotsoeng ka laser bakeng sa likhokahano tsa flange.

• Litulo tse Kholo: Li-interface tsa tšepe ho ea ho elastomer li fana ka ho koaloa ho se nang ho lutla ka matla a fokolang.

Temoho ea Lintlha: Phokotso ea 5% karolong e tšekaletseng ea tiiso e fokolitse matla a ho sebetsa ka 15%, e leng se eketsang bokhoni.

---

4. Mekhoa e Tsoetseng Pele ea Tlhahiso

• Tlhahlobo ea Phallo ea Hlobo: E ntlafatsa diparamitha tsa ho bopa ka ente bakeng sa ditiiso tsa elastomer tse se nang diphoso.

• Ho Qetella hodimo: Ho bentsha ditulo tsa di-valve ho Ra <0.2 μm ho fokotsa ho tsofala ha ditiiso tse fetohang.

• Tlhahiso e Eketsehileng: Litiiso tse hatisitsoeng ka 3D tse nang le bothata ba gradient bakeng sa ts'ebetso e ikhethileng.

---

5. Melaoana ea Teko le Netefatso

---

6. Thuto ea Nyeoe: Valve e Nyenyane ea Solenoid ea Ts'ebetso e Phahameng ea PinCheng Motor

PinCheng Motore bile pula-malibohovalafo e nyane ea solenoidletoto le nang le sebopeho sa ho tiisa se atlehileng:

• Tiiso ea Mehato e 'Meli: E kopanya FKM bakeng sa ho hanyetsa lik'hemik'hale le PTFE bakeng sa khohlano e tlase.

• Matlo a Welded ka Laser: E felisa li-gasket, e fokotsa litsela tse ka bang teng tsa ho dutla ha metsi.

• Ts'ebetso e Bohlale: Taolo ea PWM e fokotsa tlhahiso ea mocheso, e boloka botšepehi ba tiiso.

Liphetho:

• Sekhahla sa ho Dutla:

• Bolele ba bophelo: lipotoloho tse limilione tse 2 litsamaisong tsa mafura a likoloi.

---

7. Mekhoa ea Nakong e Tlang ea Theknoloji ea ho Tiisa

• Lisebelisoa tsa ho Ipholisa: Li-microcapsule li ntša litlolo ho lokisa ho senyeha ha seal.

• Litiiso tse Kopantsoeng ke Sensor: Tlhokomelo ea nako ea sebele ea khatello le ho tsofala.

• Li-Elastomer tse Sireletsang TikolohoMekhoa e meng ea FKM e thehiloeng ho Bio ho fokotsa tšusumetso tikolohong.

---

Qetello

Sebopeho sa ho tiisa sali-valve tse nyane tsa solenoidke ntlha ea bohlokoa e khethollang botšepehi le katleho ea tsona. Mekhoa e mecha ea ho etsa lintho, jeomethri le tlhahiso e nolofalletsa li-valve tse nyane, tse bohlale tse fihlelang litlhoko tsa lits'ebetso tsa moloko o latelang. Ka ho beha pele boenjiniere bo nepahetseng le liteko tse matla, bahlahisi ba ka fana ka litharollo tse ipabolang esita le libakeng tse thata ka ho fetisisa.

Mantsoe a bohlokoa:valve e nyane ea solenoid, moralo oa sebopeho sa ho tiisa, litiiso tsa FKM, liphahlo tsa PTFE, teko ea sekhahla sa ho lutla

---

Hlahloba Mekhoa e Mecha ea PinCheng Motor:
KeteloPinCheng Motorho fumana ts'ebetso e phahamengli-valve tse nyane tsa solenoidka theknoloji e tsoetseng pele ea ho tiisa.