Li-valve tsa metsi tsa Miniature DC tse nang le litsela tse tharo ke likarolo tsa bohlokoa lits'ebetsong tse tlohang ho lisebelisoa tsa bongaka ho isa ho othomathike ea indasteri, moo taolo e nepahetseng ea mokelikeli le ts'ebetso e sa lutleng li leng bohlokoa. Leha ho le joalo, ho fihlela ho tiea ha moea hantle litsamaisong tsena tse nyane ho baka liphephetso tse kholo ka lebaka la lithibelo tsa moralo, meeli ea thepa le phapang ea tlhahiso. Sengoloa sena se hlahloba mekhoa e pakiloeng ea ho ntlafatsa ts'ebetso ea ho koala li-valve tsa miniature tse nang le litsela tse tharo, ho netefatsa ts'epo le bophelo bo bolelele libakeng tse hlokang tlhokomelo.

---

1. Lisosa tse Tloaelehileng tsa ho Hlōleha ha ho Tiea ha Moea

Ho utloisisa lisosa tsa motheo tsa ho dutla ha metsi ke mohato oa pele oa ho ntlafatsa:

• Ho senyeha ha thepa: Litiiso tse tsofetseng kapa lintho tse sa lumellaneng lia ruruha/li petsoha ha li pepesehetse lik'hemik'hale.

• Qetello e Mpe ea Bokaholimo: Libaka tse thata tsa ho kopana li thibela ho kopana hantle ha tiiso.

• Ho se tsamaisane ha Katoloso ea Thermal: Katoloso e fapaneng pakeng tsa likarolo tsa valve e baka likheo.

• Liphoso tsa Kopano: Ho se tsamaisane hantle kapa torque e sa lokelang nakong ea ho kenya.

Temoho ea Lintlha: Phuputso e fumane hore 60% ea ho lutla ha li-valve tse nyane ho bakoa ke ho senyeha ha setiiso le ho se phethahale ha bokaholimo.

---

2. Khetho ea Thepa bakeng sa ho Tiisoa ho Phahameng

Ho khetha thepa e nepahetseng ho bohlokoa bakeng sa ho thibela moea nako e telele:

Thuto ea Nyeoe: Ho fetola ho tloha ho NBR ho ea ho litiiso tsa FKM ka har'a valve ea mahlakore a mararo ea bongaka ho fokolitse ho lutla ka 90% libakeng tse nang le letsoai.

---

3. Ntlafatso ea Moralo oa Meaho

Li-geometri tse ncha li ntlafatsa ts'ebetso ea ho tiisa:

• Mekhoa ea ho Tiisa habeli: Kopanya lithibelo tsa mantlha (mohlala, O-ring) le tsa bobeli (mohlala, ho tiisa molomo) bakeng sa ho se sebetse hape.

• Litulo tsa Valve tse Taperelitsoeng: Netefatsa hore khatello ea ho kopana e tšoana holim'a libaka tse koalang.

• Mekhoa e Laetsoeng ke Selemo: Boloka khatello e tsitsitseng ea tiiso ho sa tsotellehe potoloho ea mocheso.

Mohlala: Moralo oa setulo se tenyetsehang o fokolitse sekhahla sa ho lutla ho tloha ho 0.1 mL/min ho isa ho <0.01 mL/min tlas'a khatello ea li-bar tse 10.

---

4. Mekhoa ea Tlhahiso e Nepahetseng

Mekhoa e tsoetseng pele e fokotsa liphoso tse behang kotsing ea ho se tiise moea:

• Ho Sebetsa ka Laser: Finyella ho ba le bokaholimo bo sa hlakang <0.4 μm (Ra) bakeng sa ho kopana le tiiso e se nang sekoli.

• Kopano e Iketsang: Litsamaiso tsa roboto li netefatsa hore torque e tsitsitse (±2%) le ho otloloha ha tsona hoa tsitsisa.

• Teko ea ho Lutla: Teko ea 100% ea helium mass spectrometry e tiisa <1×10⁻⁶ mbar·L/s sekgahla sa ho dutla ha metsi.

---

5. Mahlale a Tsoetseng Pele a ho Tiisa

Mekhoa e mecha e sutumelletsa meeli ea ts'ebetso ea li-valve tse nyane:

• Litiiso tse se nang Elastomer: Li-diaphragm tsa tšepe tse tjhitilweng ka laser li felisa lithibelo tsa thepa ea tlhaho.

• Ts'ebetso ea makenete: Ts'ebetso e sa amaneng le ho ama e fokotsa ho senyeha ha ditiiso ka mechine.

• Liaparo tsa ho Ipholisa: Li-microcapsule li ntša mafura ho lokisa maqeba a manyane.

Thuto ea Nyeoe: Valve ea boemo ba semiconductor e sebelisang litiiso tse welletsoeng ka laser e fihletse ho se lutle letho ka lipotoloho tse milione.

---

6. Maano a Tlhokomelo bakeng sa Tshebetso e Tshwarellang

Esita le li-valve tse ntle ka ho fetisisa li hloka tlhokomelo:

• Tlhahlobo ea Kamehla: Hlahloba litiiso likhoeli tse ling le tse ling tse 6 bakeng sa liphetoho tsa ho thatafala kapa mapetso.

• Mekhoa ea ho Hloekisa: Sebelisa metsoako e sa nke lehlakore la pH ho qoba ho senyeha ha thepa.

• Tlhokomelo ea ho bolela esale pele: Li-valve tse sebetsang ka IoT li lemosa basebelisi ka ho theoha ha khatello kapa ho phahama ha mocheso.

---

PinCheng Motor: Molekane oa Hao ho Li-valve tse Sebetsang ka Bongata

PinCheng Motore ikhethang ka ho rala le ho etsa thepali-valve tsa metsi tse nyane tsa DC tse nang le litsela tse tharoka ho tiea ha moea ka tsela e ikhethang. Litharollo tsa rona li na le:

• Theknoloji ea ho Tiisa habeli e nang le Patente: E kopanya PTFE le FKM bakeng sa ts'ebetso e se nang ho dutla.

• Libaka tse koahetsoeng ka nano: Fokotsa khohlano le ho senyeha ha tsona ka 50%.

• Litšebeletso tsa OEM/ODM tse ikhethileng: Meralo e etselitsoeng lits'ebetso tsa bongaka, tsa indasteri le tsa IoT.

Liphetho: Bareki ba tlaleha phokotso ea 70% litšenyehelong tsa tlhokomelo le ts'ebetso e se nang ho lutla ea 99.9%.

---

Qetello

Ho ntlafatsa ho tiea ha moea ha li-valve tsa metsi tsa DC tse nyane tse nang le litsela tse tharo ho hloka mokhoa o akaretsang—ho kopanya thepa e tsoetseng pele, boenjiniere bo nepahetseng, le taolo e matla ea boleng. Ka ho amohela maano ana, bahlahisi ba ka fana ka li-valve tse tšepahalang, tse tšoarellang nako e telele tse fihlelang litlhoko tse thata tsa litsamaiso tsa mokelikeli tsa sejoale-joale.

Mantsoe a bohlokoa:valve e nyane ea metsi ea DC e nang le litsela tse tharo, ntlafatso ea ho tiea ha moea, litiiso tsa FKM, machining ea laser, teko ea ho lutla

---

Hlahloba Litharollo tsa PinCheng Motor:
KeteloPinCheng Motorho sibolla li-valve tse sebetsang hantle le mahlale a ho tiisa a ikhethileng.