Lipompo tse nyane tsa diaphragmli ntse li fetoha ka lebaka la moralo o bobebe, o susumetsoang ke litlhoko tse tsoang lifofaneng, lisebelisoa tsa bongaka, lisebelisoa tsa elektroniki tse nkehang habobebe le lits'ebetso tsa likoloi. Sengoloa sena se hlahloba thepa ea sejoale-joale le mekhoa ea boenjiniere e fokotsang boima ba pompo ka ho fihlela ho 40% ha e ntse e boloka kapa e ntlafatsa litšobotsi tsa ts'ebetso.

Phetohelo e Tsoetseng Pele ea Lisebelisoa

1. Li-polymer tse sebetsang hantle

• Li-diaphragm tsa PEEK (Polyether ether ketone) li fana ka phokotso ea boima ba 'mele ka 60% ha li bapisoa le tšepe

• Matlo a matlafalitsoeng ka khabone a nang le meaho ea lattice e hatisitsoeng ka 3D

• Lisebelisoa tse kopantsoeng ka nano tse nang le lisebelisoa tsa ceramic bakeng sa ho hanyetsa ho tsofala

2. Meralo ea Titanium Hybrid

• Likarolo tsa titanium tse leboteng le lesesaane bakeng sa lintlha tsa bohlokoa tsa khatello ea maikutlo

• Phokotso ea boima ba 30-35% ha e bapisoa le tšepe e sa hloekang

• Khanyetso e ntle ea ts'enyeho bakeng sa lits'ebetso tsa lik'hemik'hale

Mekhoa ea Ntlafatso ea Sebopeho

1. Ntlafatso ea Topology

• Li-algorithms tsa moralo tse tsamaisoang ke AI tse tlosang thepa e seng ea bohlokoa

• Phokotso ea boima ba 'mele ea 15-25% ntle le ho senya nako e telele

• Li-geometri tsa tsela ea mokelikeli tse ikhethileng bakeng sa ts'ebetso e ntlafalitsoeng

2. Moralo oa Likarolo o Kopaneng

• Matlo a kopaneng a pompo ea motlakase a felisang meaho e sa hlokahaleng

• Lipoleiti tsa li-valve tse sebetsang ka bongata li sebetsa e le likarolo tsa sebopeho

• Palo ea li-fastener e fokotsehile ka ho kopanya li-snap-fit

Melemo ea Tshebetso

1. Meputso ea ho Sebelisa Matla Hantle

• Litlhoko tsa matla tse tlase tsa 20-30% ka lebaka la boima bo fokotsehileng ba ho sisinyeha

• Linako tse potlakileng tsa karabelo ho tsoa ho inertia e fokotsehileng

• Ho ntlafala ha mocheso ka har'a liphutheloana tse nyane

2. Melemo e Ikhethang ea Kopo

• Li-drone: Ho nolofalletsa linako tse telele tsa ho fofa le ho eketsa bokhoni ba ho jara mojaro

• Lisebelisoa tsa bongaka tse aparoang: Ho ntlafatsa boiketlo ba mokuli bakeng sa tšebeliso e tsoelang pele

• Lisebelisoa tsa indasteri tse nang le sebaka se fokolang: Ho lumella meralo e mengata ea mechini e menyenyane

Thuto ea Nyeoe: Pompo ea Sehlopha sa Lifofane

Ntlafatso ea morao tjena bakeng sa litsamaiso tsa ho pholisa tsa sathelaete e fihletsoe:

• Phokotso ea boima ba 'mele ka 42% (ho tloha ho 380g ho isa ho 220g)

• Khanyetso ea ho thothomela e ntlafalitsoe ka 35%

• Tšebeliso ea matla e tlase ka 28%

• E bolokile bophelo ba lihora tse fetang 10,000 maemong a vacuum

Litaelo tsa Nakong e Tlang

1. Lihlopha tse Ntlafalitsoeng ke Graphene

• Li-diaphragm tsa liteko tse bontšang phokotso ea boima ba 'mele ka 50%

• Thepa e phahameng ea ho hanyetsa lik'hemik'hale

• Ho ka etsahala hore ho be le ts'ebetso ea sensor e kentsoeng

2. Meralo ea Biomimetic

• Likarolo tsa sebopeho sa mahe a linotši tse bululetsoeng ke thepa ea tlhaho

• Li-diaphragm tsa ho thatafala tse feto-fetohang tse etsisang meaho ea mesifa

• Mahlale a thepa ea ho iphekola a ntse a ntlafatsoa

Pincheng motor'sLitharollo tse bobebe

Sehlopha sa rona sa boenjiniere se ikhethile ka ho khetheha ho:

• Ntlafatso ea boima bo ikhethileng ba kopo

• Mekhoa e tsoetseng pele ea ho etsisa le ho leka

• Mekhoa ea thepa e ikhethileng

• Litšebeletso tsa mohlala ho isa tlhahiso

Papiso ea Litlhaloso tsa Tekheniki

Paramethara	Moralo oa Setso	Phetolelo e bobebe
Boima ba 'mele	300g	180g (-40%)
Sekhahla sa Phallo	500ml/motsotso	520ml/motsotso (+4%)
Matla a ho hula	8W	5.5W (-31%)
Bolele ba bophelo	Lihora tse 8,000	Lihora tse 9,500 (+19%)

Phetoho e bobebe lipompong tse nyane tsa diaphragm e emela ho fetang feela ho boloka boima - e nolofalletsa lits'ebetso tse ncha ka ho felletseng ha ka nako e ts'oanang e ntlafatsa ts'ebetso ea matla le ts'ebetso. Ha mahlale a thepa le mahlale a tlhahiso a ntse a tsoela pele, re lebeletse tsoelo-pele e kholo le ho feta ho fokotseng le ho sebetsa hantle ha lipompo.

Ikopanye le sehlopha sa rona sa boenjiniere ho buisana ka hore na litharollo tsa pompo e bobebe li ka tsoela kopo ea hau molemo joang.Tsebo ea rona ea thepa e tsoetseng pele le meralo e ntlafalitsoeng e ka u thusa ho fihlela ts'ebetso e phahameng ha u ntse u fihlela litlhoko tse thata tsa boima.