Lipompo tsa diaphragm tsa 12V ke bahale ba khutsitseng ba merero ea DIY, lik'haravene, lisebelisoa tsa bongaka le litsamaiso tsa othomathike. Sephiri sa tsona ke sefe? Motsoako o bohlale oa electromagnetism le mechine e tenyetsehang e fetolang li-pulse tse nyane tsa motlakase hore e be ho hula kapa khatello e matla. A re hlahlobisiseng hore na li sebetsa joang—le hore na ke hobane'ng ha li laola lits'ebetso tse nkehang habobebe. 

Mokhoa oa Bohlokoa: Mehato e 4 e Bonolo

1. Bulela Matla:

   • Motlakase oa 12V DC o phalla ka har'a khoele ea pompo, o etsa tšimo ea motlakase.

2. Ho Hula ha Diaphragm:

   • Matla a makenete a hula thupa ea tšepe e hoketsoeng ho diaphragm e tenyetsehang (joalo ka rabara kapa Teflon®), a e otlolla morao.

   • Sephetho: Bophahamo ba kamore boa eketseha → bo baka vacuum → bo monya metsi/moea ka valve e kenang.

3. Push ea Diaphragm:

   • Ho kgaola ha motlakase → matla a selemo a diaphragm pele.

   • Sephetho: Kamore ea fokotseha → khatello ea eketseha → mokelikeli/moea o ntšetsoang ka valve ea ho ntša.

4. Pheta:

   • Lipotoloho tse 50–100 ka motsotsoana (tse tsamaisoang ke li-pulse tsa enjene) = phallo e tsoelang pele.

Temohisiso ea Bohlokoa: Li-valve tsa flapper tse tsamaeang ka tsela e le 'ngoe (tse kenang/tse tsoang) li sebetsa joalo ka "ho hlahloba mamati," ho netefatsa hore mokelikeli o tsamaea pele feela.

 

Hobaneng e le 12V? Sebaka se Monate sa Voltage 

• Ho kgona ho tsamaiswa habonolo: E sebetsa ka dibetri tsa dikoloi, diphanele tsa letsatsi, kapa dibanka tsa motlakase tse nkehang habobebe.

• Bokgoni: E fetola 80%+ eneji ya motlakase hore e be tshebetso ya mechine (ha ho bapiswa le 60% bakeng sa dipompo tsa AC).

• Taolo: Lebelo le fetoha ka ho fetola motlakase (9V=e liehang, 12V=matla a felletseng, 14V=turbo).

 

Pompo ea Diaphragm khahlanong le Lipompo tse ling tsa 12V 

Mohlala:Tlhaloso: PYP370-XA ea Pincheng(12V, phallo ea moea ea 3 LPM, 60dB) e matlafatsa li-concentrator tsa oksijene tse nkehang habobebe. 

Likopo tsa Lefatše la Sebele

1. Bophelo ba Koloi/RV:

   • E fetisetsa peterole, e tšolla litanka tsa metsi a litšila, e butsoetsa materase.

2. Lisebelisoa tsa Bongaka:

   • Li-ventilator tse nkehang habobebe (tekanyo e nepahetseng ea moea), ho monya meno.

3. DIY le Temo:

   • Ho potoloha ha metsi ka metsi a Aquaponics, ho pholisa printa ea 3D.

4. Boiketsetso:

   • Li-gripper tsa roboto, mechine ea ho paka.

---

 Malebela a 3 a Bohlokoa a Tlhokomelo

1. Qoba ho omella ka metsi: Metsotso e fetang 2 ntle le mokelikeli e baka ho chesa haholo (eketsa sensor ea mokelikeli).

2. Li-valve tse Hloekisang Khoeli le Khoeli: Lithōle li koala li-valve tsa flapper → li fokotsa phallo (sebelisa li-inlets tse sefiloeng).

3. Hlahloba Diaphragms: Nkela sebaka dihoreng tse ding le tse ding tse 10,000 (mapetso a baka tahlehelo ya kgatello).

 

Theknoloji ea Nakong e Tlang: Lipompo tse Bohlale le tse Matla

 

• Li-motor tsa DC tse se nang borashe: Bophelo ba lihora tse 50,000 (ha ho bapisoa le 20,000 bakeng sa tse foreshelitsoeng).

• Lipompo tsa IoT: Ho lokisa khatello ea Bluetooth (mohlala, ho lokisa phallo ka sesebelisoa sa mohala).

• Di-diaphragm tse Itlotsang: Metswako ya Teflon-Kevlar e sebetsana le dikhemikhale tse kang peterole.

Hobaneng Baenjiniere ba Khetha Lipompo tsa Diaphragm: 

"Ke thipa ea Sesole sa Switzerland ea phetisetso ea mokelikeli—e ka tšeptjoang ka metsi a litšila, moea, kapa esita le lik'hemik'hale tse matla."
—Moenjiniere oa Mekhoa ea Mokelikeli, Pincheng Motor

---

Na o se o loketse ho sebedisa 12V Suction?

Ebang o haha ​​shaoara ea ho hloma liahelo kapa roboto ea laboratori, lipompo tsa diaphragm li fetola matla a betri hore e be phallo e khutsitseng le e tšepahalang.Bakeng sa ho tšoarella ha maemo a indasteri, hlahloba Letoto la 12V la Pincheng—e entsoe bakeng sa lipotoloho tse fetang 50,000 le ho hanyetsa boemo ba leholimo ba IP65.