Tlhoko e ntseng e hola ea lipompo tse nyane ts'ebetsong ea lik'hemik'hale, meriana le tlhahiso ea li-semiconductor e matlafalitse tlhoko ea thepa e khonang ho mamella li-solvent tse matla. Sengoloa sena se hlahloba lintlha tsa bohlokoa khethong ea thepa, liprothokholo tsa liteko, le maemo a hlahang bakeng sa likarolo tsa pompo tse nyane tse hananang le li-solvent, tse tšehetsoang ke tsoelo-pele ea saense ea polymer le lithuto tsa linyeoe tsa indasteri.

---

 

1. Mekhoa ea Bohlokoa ea Khetho ea Lintho tse Hanelang Solvent

Ho lumellana ha lik'hemik'hale:
Lisebelisoa li lokela ho hanela ho senyeha ha metsoako e kang acetone, toluene le metsoako e nang le chlorine. Mohlala, ​​PTFE (polytetrafluoroethylene)​ le PEEK (polyether ether ketone)​​li amoheloa haholo ka lebaka la ho se sebetse ha tsona ho li-hydrocarbon le li-acid. Lipompo tsa letoto la NDP tsa Yamada Corporation, tse sebelisang li-diaphragm tsa PTFE, ha li bontše ho ruruha le ho hong kamora lihora tse 1,000 tsa ho pepesehela metsoako ea semiconductor-grade.

Ho Tsitsisa Mekaniki:
Lisebelisoa tse nang le khatello e phahameng (mohlala, litsamaiso tsa HPLC) li hloka thepa e bolokang matla a ho tsikinyeha tlas'a khatello. Tšepe e sa hloekang ea 316L le Hastelloy C-276 li khethoa ka lebaka la ho hanyetsa ha tsona habeli khahlanong le mafome le ho tsofala ha mechini, li boloka khatello ho fihlela ho li-bar tse 50 phetisong ea tharollo ea meriana.

Tlhahiso ea ho Etsa:
Lisebelisoa li tlameha ho leka-lekanya ts'ebetso le mokhoa oa ho li etsa. Mohlala, metsoako ea fluoropolymer e nolofalletsa ho bopa ka nepo li-valve tsa pompo e nyane ha ka nako e ts'oanang e boloka khanyetso ea lik'hemik'hale - mokhoa o ntlafalitsoeng ke FLUX-GERÄTE GmbH bakeng sa lipompo tsa motlakase tse se nang VOC.

Ho Sebetsa ka Botlalo:
Mekhoa e meng e thehiloeng linthong tsa tlhaho joalo ka PVDF (polyvinylidene fluoride)​ e fana ka 80% ea khanyetso ea lik'hemik'hale ea PTFE ka theko e tlase ka 40%, e leng se etsang hore e khonehe bakeng sa lipompo tse nyane tsa bongaka tse lahloang.

---

 

2. Bakhethoa ba ka Sehloohong ba Lintho tse Boleloang le Litekanyetso tsa Tshebetso​

 

A. Li-polymer le Lihlopha

• PTFE:

  • Melemo: Ho se sebetse hantle ha lik'hemik'hale ka tsela e ikhethang, khohlano e tlase, le botsitso ba mocheso (ho fihlela ho 260°C).
  • Ditshebediso: Di-diaphragm dipompong tsa ho fumana di-solvent bakeng sa di-semiconductor fabs.
  • Meeli: Ho hanyetsa ho tsofala hantle; hangata ho kopantsoe le faeba ea khabone bakeng sa ho tšoarella.

• .SHEBA:

  • Melemo: Karolelano e phahameng ea matla ho ea boima, e hanela mouoane le li-solvent tsa tlhaho.
  • Thuto ea Nyeoe: E sebelisoa lipompong tsa Graco's UniRacer bakeng sa ho roala likoloi, e fokotsang nako ea ho sebetsa ka 30%.

 

B. Litšepe le Li-alloy

• Tšepe e sa Hloekeng 316L:

  • Melemo: E theko e tlase bakeng sa tikoloho e senyang hanyane; e loketse ho sebetsana le ethanol le methanol.
  • Teko: E pholohile lipotoloho tse 5,000 ka har'a litharollo tsa 20% HCl ntle le ho kenngoa ka sekoti.

• Hastelloy C-22​​:

  • Melemo: E hanela li-acid le li-chloride tse oxidating; ea bohlokoa bakeng sa lipompo tsa tlhahiso ea API.
  • Maemo a tloaelehileng: ASTM B575 e laela hore e sebelisoe lits'ebetsong tsa phetisetso ea li-solvent tsa meriana.

 

C. Mefuta e tsoakiloeng ea Ceramic

• Lihlahisoa tse kopantsoeng tsa Alumina-Zirconia:
  • Melemo: Ha ho na ho kenella ha metsi, ho thatafala ho tšoana le litaemane.
  • Ditshebediso: Ho sebetsana le tharollo e hlwekileng haholo dipompong tsa lithography tsa EUV.

---

 

3. Mekhoa ea Teko ea Khanyetso ea Solvent 

Teko ea ho qoelisoa:

• Disampole di qoelisoa ka har'a di-solvent mochesong o phahameng (mohlala, 60°C) matsatsi a 30-90. Phetoho ya boima le ho senyeha ha bokaholimo di lekanngwa ho ya ka tataiso ya ISO 175.

Ho potoloha ha khatello:

• E etsisa maemo a sebele ka ho fapanyetsana pakeng tsa maemo a vacuum le a khatello e phahameng. Lipompo tsa motlakase tsa FLUX-GERÄTE li mamella lipotoloho tse 10,000 ho libare tse 10 ka ho lutla ha <0.1%.

Ketsiso ea Lefatše la 'Nete:

• Lipompo tse nyane li lekoa libakeng tse nang le li-solvent tse ngata (mohlala, libaka tsa ho hloekisa peterole). Litsamaiso tsa AODD tse sebelisang IoT tsa North Ridge Pumps li lekola mokhathala oa thepa tlas'a phallo e tsoakiloeng ea xylene/acetone.

 

---

 

4. Liphephetso tsa ho Fetola Maemo​

Litlhoko tsa Indasteri e Fapaneng:

• Lilaboratori tsa semiconductor li beha bohloeki pele (ISO Class 1), ha meriana e shebane le ho latela melao ea FDA. Ho arohana hona ho thatafatsa maemo a lefats'e.

Likheo tsa Taolo: 

• Meralo e teng e kang EU REACH le Melao ea Ts'ireletso ea Lik'hemik'hale ea US EPA ha e na litataiso tse ikhethileng tsa pompo e nyane bakeng sa ho lumellana ha solvent.

Mekhoa ea Tšebelisano-'moho:

• TheInternational Micro Pump Consortium (IMPC)e ntse e rala sistimi ea lihlopha tsa thepa e nang le maemo (sepheo sa 2026), e lumellanang le ISO 10993 bakeng sa ho lumellana ha lintho tse phelang le ASTM D543 bakeng sa ho hanyetsa lik'hemik'hale.

 

---

 

5. Litaelo tsa Nakong e Tlang le Mekhoa e Mecha

Kopanyo ea Lintho tse Bohlale:

• Li-alloy tsa memori ea sebopeho le li-polymer tse iphekolang li ka nolofalletsa ho ikamahanya le liphetoho tsa solvent ka nako ea sebele. Liteko tsa laboratori li bontša lipompo tse koahetsoeng ke SMA tse lokisang libaka tsa valve ha li pepesehetse liphetoho tsa pH.

Ho Etsa Hore Lintho li Ikhethe ka ho Hatisoa ka 3D:

• Tlhahiso ea litlatsetso e lumella likheo tsa pompo tse ntlafalitsoeng ke topology ka har'a metsoako ea PEEK-CF, e fokotsang ho kenella ha solvent ka 60% ha ho bapisoa le likarolo tse bōpiloeng.

Litharollo tse ka bolang:

• Lipompo tse nyane tse thehiloeng ho PLA lia hlaha bakeng sa ho aba li-solvent tse mosa tikolohong, leha ho le joalo ho phela nako e telele libakeng tse mabifi e ntse e le tšitiso.

 

---

 

Qetello​​

Khetho le ho etsa hore thepa e hananang le ho qhibiliha e be boemong bo tloaelehileng bakeng sa lipompo tse nyane li hloka mokhoa oa lithuto tse ngata, ho kopanya saense ea thepa, ho latela melao le litlhoko tse ikhethileng indastering. Ha mahlale a kang tlhokomelo ea lintho tse boletsoeng esale pele e tsamaisoang ke AI le li-ceramic tse kopantsoeng li ntse li tsoela pele., maemo a lefats'e a lumellanang a tla potlakisa boqapi ha ka nako e ts'oanang a netefatsa polokeho le bokgabane. Bankakarolo ba tlameha ho beha pele R&D ya tshebedisano-mmoho ho rarolla diphephetso tsa ho tsamaellana ha ditharollo tikolohong ya diindasteri e ntseng e eketseha e le menyenyane.