Selelekela

Lipompompo tse nyane tsa DC diaphragm e se e le tsa bohlokoa haholo lits'ebetsong tsa bongaka, tsa indasteri le tsa boiketsetso ka lebaka la boholo ba tsona bo kopaneng, taolo e nepahetseng ea mokelikeli le matla a matla. Ts'ebetso ea lipompo tsena e itšetlehile haholo ka tsonamahlale a ho laola koloi, e laolang lebelo, khatello le ho nepahala ha phallo. Sengoliloeng sena se hlahloba tsoelopele ea morao-rao hopompo e nyane ea DC diaphragmtaolo ea ho khanna, ho kenyelletsa le PWM, litsamaiso tsa maikutlo a sensor, le khokahano e bohlale ea IoT.

---

1. Pulse Width Modulation (PWM) Taolo

Kamoo E Sebetsang Kateng

PWM ke mokhoa o atileng haholo oa ho laola lipompo tse nyane tsa DC diaphragm. Ka ho bulela le ho tima matla ka potlako lipotolohong tse fapaneng tsa mosebetsi, PWM e lokisa motlakase o sebetsang o fanoang mochining oa pompo, e nolofalletsang:

• Taolo e nepahetseng ea lebelo(mohlala, 10% -100% ea sekhahla sa phallo e kholo)

• Matla a matla(ho fokotsa tšebeliso ea matla ka 30%)

• Ho qala/ho emisa ha bonolo(thibela litlamorao tsa hamore ea metsi)

Lisebelisoa

• Lisebelisoa tsa bongaka(lipompo tsa infusion, mochini oa dialysis)

• Ho tsamaisa metsi ka boiketsetso(tekanyo ea lik'hemik'hale, boiketsetso ba lab)

---

2. Koetsoe-Loop Feedback Control

Kopano ea Sensor

Lipompompo tsa sejoale-joale tse nyane tsa diaphragm li kenyelletsali-sensor tsa khatello, li-flow metres, le li-encoderho fana ka maikutlo a nako ea nnete, ho netefatsa:

• Litefiso tsa ho phalla kamehla(±2% ho nepahala)

• Puseletso ea khatello e ikemetseng(mohlala, bakeng sa li-viscosities tsa mokelikeli o fapaneng)

• Tšireletso ea boima bo feteletseng(koala haeba li-blockages li etsahala)

Mohlala: Pompe ea Pinmotor's Smart Diaphragm

Pinmotor ea morao-raoPompo e lumelletsoeng ke IoTe sebelisa aPID (Proportional-Integral-Derivative) algorithmho boloka phallo e tsitsitseng leha e le tlasa khatello e fetohang.

---

3. Bakhanni ba Likoloi tsa Brushless DC (BLDC).

Melemo Ho Fetisisa Brushed Motors

• Bokhoni bo phahameng(85% -95% vs. 70% -80% bakeng sa brushed)

• Nako e telele ea bophelo(lihora tse 50,000+ khahlano le lihora tse 10,000)

• Ts'ebetso e khutsitseng(<40 dB)

Mekhoa ea ho Laola

• Sensorless FOC (Taolo ea Tšimo)- E ntlafatsa torque le lebelo

• Mehato e tšeletseng ea ho tsamaea- E bonolo empa e sa sebetse hantle ho feta FOC

---

4. Taolo ea Smart le IoT-Enabled

Likarolo tsa Bohlokoa

• Tlhokomelo e holeka Bluetooth/Wi-Fi

• Tlhokomelo ya esale pele(tlhahlobo ea ho sisinyeha, ho lemoha hore na motho o apere joang)

• Ntlafatso ea ts'ebetso e thehiloeng marung

Taba ea Tšebeliso ea Liindasteri

Feme e sebelisangLipompo tsa diaphragm tse laoloang ke IoTnako e fokotsehileng ka45%ka ho lemoha liphoso tsa nako ea sebele.

---

5. Theknoloji ea ho Boloka Matla

Thekenoloji	Poloko ea Matla	Molemo ka ho fetisisa Bakeng sa
PWM	20%-30%	Lisebelisoa tse tsamaisoang ke betri
BLDC + FOC	25%-40%	Litsamaiso tse sebetsang hantle haholo
Mekhoa ea ho robala/ho tsoha	Ho fihla ho 50%	Lisebelisoa tsa nakoana

---

Qetello

Tsoelo-pele hopompo e nyane ea DC diaphragmtaolo ea ho khanna-joalo kaPWM, BLDC motors, le IoT kopanyo-ba fetola tšebetso ea mokelikeli indastering ho tloha ho tsa bophelo bo botle ho ea ho othomathiki. Theknoloji ena e netefatsaho nepahala ho phahameng, ho sebetsa hantle ha matla, le ho tšepahalaho feta pele.

U batla litharollo tse tsoetseng pele tsa pompo ea diaphragm? Hlahloba Pincheng motor's rkhalefo ealipompo tse laoloang ka bohlalebakeng sa morero oa hau o latelang!